Tankpad Skull transparent 1 page

Tankpad Skull transparent 1 page

The productdescription on our webshop has been automatically translated. We apologize for any errors. You can always ask us questions in English.

Tankpad for your motorcycle, you can cut it yourself in any desired shape. Color is transparent. Tank pad is thick (3D, about 1mm thick) and provides protection against scratches on your tank of your motorcycle pants or motorcycle jacket. Of course it can also be used to protect part of your lower fairing against splashing stones.

Dimensions of the tank pad are 200x330mm, thickness is 0.5mm (thicker than a "normal" sticker).

Apply tank pad

For a good adhesive result (applies to every sticker) you must ensure that the room is at least 15 degrees and not damp (as is often the case in a shed or garage). For example, if you put the tank in your living room to heat up, leave it for at least 1 day as you will initially get condensation and that takes a while to evaporate.

If the tank pad is glued to a curve, heat the tank suit with a hair dryer after gluing. If necessary, tape the corners tightly with adhesive tape for 24 hours, so that the glue has a chance to adhere well. Remove this tape after 24 hours.

Do you still have that corners let go, take a clear photo and email us with the issue. Never pull off the tank pad, otherwise it can no longer be used.